Resources & Research

ATA Truck Tonnage Index Fell 1.4% In June

The American Trucking Associations’ advance seasonally adjusted For-Hire Truck Tonnage Index decreased 1.4 percent in June, although May’s reduction was revised from 0.6 percent to just 0.1 percent. May and June marked ...

Class 8 Factory Orders Up

Orders for Class 8 trucks rose 8 percent year-over-year in March with 12,319 units. Year-to-date orders still lag last year's volume by nearly 30 percent. (more)

HDAW presentations, takeaways

Miss HDAW 2010? Here you will find what presentations and handouts from the general session speakers as well as the educational sessions. (more)

Under the Hood – December 2008

Safety Recalls The National Highway Traffic Safety Administration has issued the following recalls: Seven model year 2007 a...

Under the Hood – October 2008

Reman Fuel Injectors Improved There have been some issues with Caterpillar mechanical unit injectors on models: 3114 ATAAC NA D1 (S/N:...

Under the Hood – August 2008

Revised Exhaust Manifold Mack has revised the exhaust manifolds used on ASET AI and AMI engines, whereby the slip-joint clearances ha...

Under the Hood – June 2008

Air Brake Pressure Balance Test Bendix Commercial Vehicle Systems recommended the following procedure to determine the air pressure d...

Under the Hood – April 2008

Interference Between Hood Spring & Charge Air Cooler Hose On Mack CTP, CHN and CT models manufactured before April 16, 2007, there may...

Under the Hood – March 20081

Cam Tube Service Kit Installation Hendrickson released the guidelines for installing the cam tube service kit on compatible axle/beam ...

Under the Hood – March 2008

Disposal Of Gas-Charged Pressurized Shocks & Struts Monroe has released the following guidelines for the disposal of old and defective...

Under the Hood – December 2007

Improved Water Temperature An improved water temperature regulator has been developed to improve the functionality of the cooling syst...

Under the Hood – November 2007

Spring Hanger Mounting Bracket Wear Plates On certain Mack chassis equipped with the Maxlite 20/40 rear air suspension, you may see we...

Under the Hood – August 20071

Tie Rod Arm Removal & Installation ArvinMeritor recommended the following procedure for first removing and then installing the tie rod...

Under the Hood – August 20071

Camshaft Inspection Hendrickson has developed the following maintenance procedure for inspecting the camshaft and camshaft bushings (o...
Page 29 of 41« First...1020272829303140...Last »

More From Resources & Research


Have you revised your truck sales forecast for 2015 in the past 6 months?


Tennessee International truck dealer passes away

Volvo Trucks adds to video series

SmartTruck Systems, Mckinney Trailer reach agreement


GALLERY: Rush Truck Center Tech Rodeo, Day 1

Peterbilt of Northwest Ohio acquired by Allstate Pete

Campbell Supply Elite Support certified for fourth time

Successful Dealer Award

Click here to read about the award and see the nominees for this year's award.