Talbert introduces new nitrogen trailer

April 8, 2014

TalbertTalbert Manufacturing introduces its new E3Nitro trailer.

Talbert says the innovative nitrogen-assisted equalizing system provides the versatility haulers with East Coast trailers need to run in 3+1, 3+2 or 3+3 spread-axle configurations.

The new E3Nitro is part of a larger series that also includes the E2Nitro and E1Nitro, with three, two or one pin-on axle(s), respectively. An ENitro system, with its nitrogen accumulator, oscillates around a central self-tracking pivot points to provide proportionate weight distribution in each axle grouping, Talbert says.

With the E-Nitro series, Talbert is able to build trailers with capacities well beyond what can be achieved with simple mechanical or rigid axle extensions. Historically, East Coast trailers had been limited to capacities below their potential because of axle-weight restrictions and permitting issues. But by incorporating the new Talbert E3Nitro axle extension, haulers can scale their trailers appropriately and use them to their full potential, Talbert says.

The E3Nitro is designed for trailers with capacities of up to 85 tons and can carry 74,100 lbs. (24,700 lbs. per axle) in its 3+3 configuration. An E2Nitro, which is designed for trailers with up to 65-ton capacities, can support 49,400 lbs. (24,700 lbs. per axle) in a 3+2 formation. Finally, the E1Nitro is designed for trailers with up to 55-ton capacities and can carry 24,700 lbs. (24,700 lbs.per axle) in its 3+1 configuration, the company says.

Both the E1Nitro and E2Nitro are built with two cylinders, and the E3Nitro has three. The extra cylinder is built to handle more capacity for heavy loads. In addition, Talbert says the E3Nitro provides the ability to disconnect cylinders for capacity alterations. This makes running in 3+1 or 3+2 configurations possible because one cylinder can be removed. Because the E3Nitro is modular, the spreader can be removed and the trailer can operate as a four-axle in addition to the 3+1, 3+2 and 3+3 configurations. This is a distinct advantage of the E3Nitro over competitive products, the company says.

E-Nitro is a new name for nitrogen-assisted systems that Talbert previously called The Equalizer series. The company introduced its single-axle version in 2010 and shortly thereafter began manufacturing a tandem-axle model, as well.

From Our Partners


There are no comments

Your email address will not be published. Required fields are marked *

October totals show trailer orders maintaining positive stretch

The trailer backlog continued its positive trend in October, ACT ...

NTEA customer service webinar scheduled for December

NTEA has announced it will hold its next member webinar ...

Ryder ups commitment to natural gas within fleet

Ryder System Inc., has tapped Clean Energy Fuels Corp. to ...